Home / Moline

Asphalt paving and sealcoating in Moline, Illinois

Asphalt paving and sealcoating job near Moline, Illinois

Quad City Paving handles asphalt paving and sealcoating for homeowners and businesses in Moline, Illinois. About 41,965 people live in Moline, according to the U.S. Census Bureau's 2023 estimate.

Tell us what you need and a local pro will give you a free, no-pressure quote.

Get my free Moline quote

About Moline

Moline is a city in Rock Island County, Illinois, about 8 miles southeast of Davenport. Wikidata lists 1848 as its founding year. It sits on or next to the Mississippi River. Interstate 74, Interstate 280 and Interstate 80 serve the town.

Like the rest of the Davenport area, Moline has a humid continental climate: cold, snowy winters and warm summers, so freeze-thaw cycles and spring storms are part of planning asphalt paving and sealcoating here.

Moline at a glance

Sources: U.S. Census Bureau (Gazetteer and geocoder); Wikidata; Wikipedia: Moline; Wikipedia: Davenport climate.

Asphalt paving and sealcoating Services in Moline

Asphalt Driveway Installation in Moline

New asphalt driveways built on properly compacted base material that handles our clay soils. Local pros grade for drainage so water moves away from your foundation instead of pooling on the surface.

Parking Lot Paving in Moline

Commercial parking lots designed to handle heavy traffic and Iowa weather. Proper thickness and base prep mean your lot holds up through freeze-thaw cycles and spring flooding season.

Sealcoating in Moline

Protective sealcoat application extends pavement life by blocking water and UV damage. We recommend sealing every 2-3 years for driveways in the Quad Cities area to prevent premature cracking.

Asphalt Repair and Patching in Moline

Fix potholes, cracks, and settling before they spread. Small repairs done now save you from full replacement later, especially important with our soil conditions.

Crack Filling in Moline

Hot rubberized crack filler stops water from getting under your pavement. This is critical here because once water penetrates, our freeze-thaw cycles destroy asphalt fast.

Asphalt Milling and Resurfacing in Moline

Remove the top layer and put down fresh asphalt when the base is still good. Costs less than full replacement and adds years of life to worn parking lots and driveways.

How It Works

  1. Free On-Site Estimate. Local pros come to your property, look at the existing conditions, check drainage and soil issues, and measure the area. You get a detailed written quote within a day or two.
  2. Site Preparation. Local pros excavate to proper depth, haul away old material if needed, and grade the subsoil for drainage. On clay soils, compaction at this stage makes or breaks the job.
  3. Base Installation. Clean crushed aggregate goes down in lifts and gets compacted with a plate tamper or roller. Proper base thickness depends on whether it's a driveway or parking lot and what the soil conditions look like.
  4. Asphalt Paving. Hot asphalt gets laid at the right temperature and compacted smooth. Local pros install the proper thickness for your use, usually 2-3 inches for residential driveways and more for commercial work.
  5. Final Grading and Cleanup. Edges get trimmed, transitions to existing pavement are feathered smooth, and the site gets cleaned up. Local pros go over care instructions including when you can drive on it.

What Asphalt Paving Costs in the Quad Cities

A typical residential driveway runs between $3 to $5 per square foot installed, so a standard two-car driveway around 600 square feet usually costs $1,800 to $3,000. Sealcoating runs about $0.15 to $0.25 per square foot, which means $90 to $150 for that same driveway every few years. Parking lots cost $2.50 to $4 per square foot depending on size, with larger areas getting better per-foot pricing. Prices go up if the pro needs to remove old asphalt or concrete, if drainage problems require extra excavation and base work, or if access is difficult. Clay soil that needs extra stabilization or areas that have settled from past flooding also add to the cost. Crack filling and patching run $100 to $300 for minor repairs, while full resurfacing costs about 60% of new installation. These are typical ranges for Scott County work and actual prices depend on your specific site conditions.

Asphalt paving and sealcoating Questions in Moline

Do I need a permit for asphalt paving and sealcoating in Moline?

It depends on the job. For work inside Moline city limits, check with the city first (https://www.moline.il.us/). Outside city limits, Rock Island County rules apply. A local pro can tell you whether your project needs a permit before work starts.

How far is Moline from Davenport?

About 8 miles southeast of Davenport, measured straight line between the two city centers. Actual drive time depends on the route.

How do I get a quote for asphalt paving and sealcoating in Moline?

Use the free quote form and put Moline as your town. Quad City Paving is an independent referral service, so your request goes to local paving contractors who take jobs in Moline and the rest of Rock Island County.

Other Towns We Serve

Share this pageTextFacebook
Call